Order tracking
Service request
Karaj Golshahr, Eastern Villa, Parveen St., Shahadai Daeshamaz Blvd., No.-78
Add to favorites
Add to comparison listFaratel STB 3X BLK 3 Phase Stabilizer with 32 A per output phase can be used well by three-phase industrial systems, precision laboratory devices, sensitive measuring instruments, telecommunication systems, etc. Protect against fluctuations and disturbances in the city's electricity.
In addition, the Faratel stabilizer significantly increases the accuracy of the operation of the consumer devices, and as a result, prolongs their life and accuracy and prevents repair costs and waste of time.
The Faratel three-phase stabilizer is designed and built in such a way that even in rapid changes of electricity in the city, the output voltage is set to 220 VAC for each phase.
Among the unique features of this device, we can mention the following:
The device is equipped with a voltage stabilization circuit, so that it automatically detects the decrease or increase of electricity and provides the appropriate voltage to the consumer after stabilizing it.
It is equipped with a protective system so that if the output voltage of any of the phases is more than 240 VAC (275 VAC input) or less than 190 VAC (140 VAC input),
It cuts off the output of the stabilizer and protects the consumer devices from unauthorized electrical voltage, and if the voltage is normalized, it automatically connects the output power.
It is equipped with a filter that eliminates the noise in the city's electricity that causes disruption in the operation of precise and sensitive devices and creates electricity free of any parasites for the use of consumer devices at the outlet.
It has a delay circuit to provide the appropriate voltage to the consumer in case of power outage, after the city's electricity fluctuations are resolved.
It is equipped with an audible alarm that sounds and warns whenever the consumption of the device exceeds 25 amps in each phase. In this case, in order to disconnect the audible alarm, you need to reduce the consumption load.
It has an input phase sequence detection circuit. In such a way, if the phase sequence is not observed in the input electricity, the output power will not be connected.
If the consumer is a lamp, the voltage stabilization during the fluctuation of the city's electricity is in the form of dimming or filling the light bulb.
aa
Karaj, Golshahr, Eastern Villa, Parveen St., Shahadai Daeshamaz Blvd., No.-78, Faratel Building
info@petapowertech.com 
Android App